|
|
|
|
|
|
|
|
|
|
|
|
|
|
Should be installed only on a grounded 125 volt AC circuit which is protected by a single fuse or circuit breaker. End of life function stops voltage in the event of a GFCI component failure. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets UL 943 requirements. 15 amp, 125 volt.
|
Should be installed only on a grounded 125 volt AC circuit which is protected by a single fuse or circuit breaker. End of life function stops voltage in the event of a GFCI component failure. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets UL 943 requirements. 15 amp, 125 volt.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
Should be installed only on a grounded 125 volt AC circuit which is protected by a single fuse or circuit breaker. End of life function stops voltage in the event of a GFCI component failure. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets UL 943 requirements. 15 amp, 125 volt.
|
UL 943-2006 compliant. Lock out function will not allow GFCI to reset if wired incorrectly. End of life function stops voltage in the event of a GFCI component failure. 20 Amp/125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL 943-2006 compliant. Lock out function will not allow GFCI to reset if wired incorrectly. End of life function stops voltage in the event of a GFCI component failure. 20 Amp/125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
Should be installed only on a grounded 125 volt AC circuit which is protected by a single fuse or circuit breaker. End of life function stops voltage in the event of a GFCI component failure. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws. Meets UL 943 requirements. 15 amp, 125 volt.
|
UL 943-2006 compliant. Lock out function will not allow GFCI to reset if wired incorrectly. End of life function stops voltage in the event of a GFCI component failure. 20 Amp/125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired. UL Listed. Meets all UL Hospital Grade requirements.
|
|
Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired. UL Listed. Meets all UL Hospital Grade requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired. UL Listed. Meets all UL Hospital Grade requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
Meets new 2008 NEC Code tamper resistant requirements. Helps prevent improper insertion of foreign objects. UL 943-2006 compliant. Lock out function will not allow GFCI to reset if miss-wired. End of life function stops voltage in the event of a GFCI component failure. 125 Volt AC. 8 back wiring holes and side wire screws accept up to 12 gauge wire. LED status indicator, color matched wall plate and screws.
|
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GFCI receptacle. Test and reset buttons match the two-tone color combinations of the receptacle. UL listed, fully compliant with 4th edition Class A GFCI, UL 498 requirements. Indicator light makes certain installation is correct and provides quick visual reference of a tripped or "end of life" connection. Ground screw back wiring clamp for secure termination. 8 back wiring holes accept up to #10 AWG stranded or solid wire. Terminal screws are backed out, staked and ready to wire. Built-in wire stripper. Welded back body, virtually unbreakable. 120 volt, 15 amp. Tamper resistant receptacles have a UL Listed shutter system. 15 amp, 125 volt.
|
|
Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired. UL Listed. Meets all UL Hospital Grade requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indicator light to show tripped or "end of life" condition. Safety feature stops all power to the receptacle if the GFCI protection fails or is mis-wired. Trip threshold (5ma+/-1ma) and response time (0.025 sec.) meet Class A requirements. Color-matched and recessed test and reset buttons. Impact-resistant thermoplastic construction with thermoplastic wallplate included. 8 separate backwiring holes accept up to #10 AWG stranded or solid wire, for maximum flexibility. Line terminal screws are backed out, staked, ready to wire. Device and wallplate mounting screws are captive, speeding installation time. Ground screw backwiring clamp for fast, secure termination. Back and side wired. UL Listed. Meets all UL Hospital Grade requirements.
|
|
|
