|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8", 1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley.
|
Quicklatch equipped runglock provides easier method of securing fly base sections when extended. One finger operation. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Does not include rope and pulley. Dimensions: 3-1/4' rail depth, 5-3/4' stack height, 14-11/16" base inside, 13-11/16" fly inside, 17-11/16" base outside and 16-1/16" fly outside.
|
Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Dimensions: Rails 3-3/16" wide, flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections.
|
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Rugged gravity-spring locks operate smoothly. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
|
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant. Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8", 1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley.
|
Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
|
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant. Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections.
|
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
|
Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
|
Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported.
|
Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant. Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
|
Adjust 3/8" increments up to 8-1/4". Dual action foot for use on hard or penetrable surfaces. Non-conductive, 7-layer construction fiberglass side rails. ALFLO twist-proof performance. Slip-resistant steps and rugged locks. Dimensions: rails 3" wide, rungs 1-3/4", base widths 17-3/8" outside rails (20-3/4" to outside of feet, flange 1-1/16" wide and fly width 14-1/4" outside. Length of extension ladders when not extended is half the total length of the sections.
|
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported.
|
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant. Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
|
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Heavy-duty plated steel swivel safety shoes with thick rubber tread. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Dimensions for 16': Rails 3-1/4" wide; 1.2" Rail flange; 1.626" Rung; Base outside width 17-1/16"; Fly outside width 16-1/16". Dimensions for 40': Rails 3-5/16" wide; Rail flange; Rung; Base outside width 17-11/16"; Fly outside width 16-11/16". Meets or exceeds the safety standards set by ANSI and OSHA. FE3216 does not include rope and pulley.
|
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
|
|
|
