|
|
|
|
|
|
|
|
|
|
|
Used to secure chisels to air hammer without making changing chisels slow or difficult.
|
Round.
|
Fits die grinder with with 1/4" collet No.EW-012 (SKU 458-7671). 25,000 RPM max.
|
|
|
|
|
|
|
|
|
|
|
|
|
For 3" air cut-off tool No.EW-148 (SKU 805-3043). 25,000 RPM max.
|
For 6" dual action air sander No.EW-480 (SKU 956.3115). 25,000 RPM max, black.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" die grinder (Grinding Wheels Not Included). 4 cfm's at 90 psi. Minimum hose diameter is 3/8". Uses 1/4" and 1/8" collets.
|
Die cast body and dial type gauge with rubber protector. Fitted with single clip-on connector. Air pressure: 0-220 PSI. Air inlet: 1/4'' NPT.
|
Quick-change spring chisel retainer for easy changes. Specs: 4,500 RPM, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose. Includes air hammer and punch, ripping, cold, and panel cutter chisels with round 0.401" shanks.
|
|
|
|
|
|
|
|
|
|
|
|
|
Built-in power regulator. Cuts through 1" diameter steel rods, fiberglass, copper or aluminum tubing and angle iron up to 1/2". Accepts 3" diameter x 1/16" thick cutting wheels. Specs: 20,000 RPM, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
|
Includes: 1 piece tapered brass inflator; 1 piece inflation needle; 2 piece 1/4'' female brass plugs; 4 piece 1/4'' male brass plugs; 1 piece dual tire chuck; 1 piece pencil tire gauge; 1 piece brass blow gun; 1 piece brass safety nozzle. 2 piece male brass hose connectors; 1 piece 1/4" quick brass coupler. 1 piece air blow gun; 1 piece female brass hose connector.
|
3" air cut-off tool with cut-off disc and hex wrench air tool. 4 CFM's at 90 psi. Minimum hose diameter is 3/8".
|
|
|
|
|
|
|
|
|
|
|
|
|
Built-in power regulator. Equipped with 3-1/2", 4", and 5" sanding discs. Specs: 18,000 RPM, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
|
|
Kit includes: 1 pc brass tire chuck. 1 pc female brass connector. 1 pc male brass connector. 1 pc 1/4'' x 25' air hose. 1 pc tapered brass inflator. 1 pc air blow gun. 1 pc inflation needle adapter. 1 pc inflation needle. 2 pc 1/4'' quick brass couplers. 2 pc 1/4'' male brass plugs. 2 pc 1/4'' female brass plugs and 1 pc brass nozzle.
|
|
|
|
|
|
|
|
|
|
|
|
|
Built-in power regulator. Rear exhaust directs dust, debris, and noise away from operator. Convenient lever throttle for precise speed control. Specs: 22,000 RPM, 4.5 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" air hose.
|
Reversible to assist when binding occurs and for retracting screws. Specs: 1,800 RPM free speed, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
|
Built-in power regulator to control speed. Accepts 6" diameter sanding pads. Specs: 10,000 RPM, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
45 ft-lbs torque range. 4 cfm's at 90 psi. Minimum hose diameter is 3/8".
|
2 in 1 die grinder/cut-off tool kit with storage case. Uses 1/4" and 1/8" collets. 5 cfm's at 90 psi. Minimum hose diameter is 3/8".
|
Built-in power regulator to control speed and torque. Specs: 230 ft-lbs max torque, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard 1/4" collet grinder accepts a wide range of accessories. Includes 1/4" air die grinder, 5 mounted grinding stones with 1/4" collet and 5 with 1/8", adapting 1/8" collet for accepting 1/8" accessories also, 2 hand wrenches, 1 nipple, and a blow-molded case. Specs: 22,000 RPM free speed, 4.0 CFM air consumption. 1/4" NPT air inlet requires 3/8" hose.
|
Compact size to get into tight spaces. Specs: 11,000 RPM, 5.5 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
|
1/2" air impact wrench, 230 ft-lbs. 4 cfm's at 90 psi. Minimum hose diameter is 3/8".
|
|
|
|
|
|
|
|
|
|
|
|
|
Butterfly design allows 1-hand directional changes. Specs: 12,100 RPM, 4.5 CFM average air consumption at 90 PSI. 1/4" NPT air inlet requires 3/8" hose.
|
Variable speed trigger for precise speed control. Reversible air drill. Air tool average cfm is 5 at 90 psi. Minimum hose diameter is 3/8". Jacobs chuck.
|
Variable speed. Uses 6" sanding pad. Minimum hose diameter is 3/8". 5 cfm's at 90 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
Die grinder features a composite housing for durability and powerful 1/4 HP motor. Specs: RPM: 27,000, Air Inlet Size : 1/4", Min. Hose Size: 3/8", Collet Size (in.): 1/4, Side Handle: No: Durable composite housing Ball bearing construction 1/4 HP motor Self-locking throttle.
|
Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting metals, chipping and scraping surfaces. Specs: Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes chisel shank size .401.
|
For light-duty engine and exhaust work, installing and removing nuts. Specs: 45 ft-lbs max torque, 160 RPM free speed, 4.0 CFM average air consumption at 90 PSI. 1/4" NPT air inlet.
|
|