|
|
|
|
|
|
|
|
|
|
|
High speed steel teeth deliver maximum durability. Alloy backing steel provides extended blade life. Precision formed teeth create fast, clean cuts. Specs: blade dimensions 35-3/8"x1/2"x.020".
|
High speed steel teeth deliver maximum durability. Alloy backing steel provides extended blade life. Precision formed teeth create fast, clean cuts. Specs: blade dimensions 35-3/8"x1/2"x.020".
|
High speed steel teeth deliver maximum durability. Alloy backing steel provides extended blade life. Precision formed teeth create fast, clean cuts. Specs: blade dimensions 35-3/8"x1/2"x.020".
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel teeth deliver maximum durability. Alloy backing steel provides extended blade life. Precision formed teeth create fast, clean cuts. Specs: blade dimensions 35-3/8"x1/2"x.020".
|
Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 5/16" to 1/2" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.
|
Matrix II speed steel teeth with 8 percent cobalt. Varying set angles and gullet depths break up harmonic vibrations generated in cutting. Designed for interrupted cutting applications (tubing, structurals, etc.). Also production cutting of solids in a variety of sizes or shapes. Rental.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. For cutting stock 5/32" to 3/16" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.
|
Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 3/16" to 5/16" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.
|
Specially set and sharpened for clean, fast cuts. Highest quality steel for maximum strength in the weld joint. For fine scroll cutting in plywood, thin veneers, plastics and compositions.
|
|
|
|
|
|
|
|
|
|
|
|
|
For popular 5-1/2in. and 4in. x 6in. horizontal band saws. Hard Back blades permit greater tension, improved blade rigidity and straighter, more accurate cuts. Wavy Tooth Style has three teeth with varying sets to the right followed by one straight tooth and three teeth with varying sets to the left. Because three teeth share the cutting and the set extends below the gullets, wavy set teeth are less likely to strip than raker set teeth.
|
For popular 5-1/2in. and 4in. x 6in. horizontal band saws. Hard Back blades permit greater tension, improved blade rigidity and straighter, more accurate cuts. Wavy Tooth Style has three teeth with varying sets to the right followed by one straight tooth and three teeth with varying sets to the left. Because three teeth share the cutting and the set extends below the gullets, wavy set teeth are less likely to strip than raker set teeth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hard or soft wood, plastic, mild steel and non-ferrous metal (for machines with speed reduction). For all vertical, stationary, floor standing 2-wheel band saws.
|
|
|
|
|
|
|
|
|
|
|
|
|
For hard or soft wood, plastic, mild steel and non-ferrous metal (for machines with speed reduction). For all vertical, stationary, floor standing 2-wheel band saws.
|
Specially set and sharpened for clean, fast cuts. Highest quality steel for maximum strength in the weld joint. For fine scroll cutting in plywood, thin veneers, plastics and compositions.
|
Specially set and sharpened for clean, fast cuts. Highest quality steel for maximum strength in the weld joint. For general purpose, fast cutting in all wood, plastic and composition material.
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially set and sharpened for clean, fast cuts. Highest quality steel for maximum strength in the weld joint. For general purpose, fast cutting in all wood, plastic and composition material.
|
Specially set and sharpened for clean, fast cuts. Highest quality steel for maximum strength in the weld joint. For fast cutting in all wood, plastic and composition material.
|
For hard or soft wood, plastic, mild steel and non-ferrous metal (for machines with speed reduction). For all vertical, stationary, floor standing 2-wheel band saws.
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially set and sharpened for clean, fast cuts. Highest quality steel for maximum strength in the weld joint. For fine scroll cutting in plywood, thin veneers, plastics and compositions.
|
Specially set and sharpened for clean, fast cuts. Highest quality steel for maximum strength in the weld joint. For general purpose, fast cutting in all wood, plastic and composition material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to maximize performance of the saw blade. Deliver long tooth life with exceptional durability in metal cutting applications, including strut, conduit, angle iron, copper tube, threaded rod and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. For cutting common materials 5/32" - 3/16" thick and very hard materials 3/16" - 5/16" thick. Blade dimensions: 27" x 1/2" x .020"
|
Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 5/16" to 1/2" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.
|
Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 3/16" to 5/16" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.
|
|