|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf for circular and miter saws. Designed for faster, cleaner cutting. Durable, machine welded carbide tips. Anti-kick back safety feature. C45, 20 degree hook angle, 6,500 RPM.
|
Thin kerf saw blade for circular saws. Alternate top bevel, .2.7mm kerf, 13 degree hook angle.
|
Thin kerf saw blade for circular saws and table saws. Designed to cut all wood materials faster and more cleanly than steel blades. Alternate top bevel, .070" plate, .120" kerf, 10 degree hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf saw blades are for use with miter saw and table saws. Fast ripping table saw blade cuts in natural wood, plywood and wood composites. Alternate top bevel, +15 degree hook angle, .097" kerf.
|
Construction carbide teeth for longer life. Face ground carbide teeth for fast, clean cuts. Fully hardened plate runs truer longer. Reinforced shoulder for added durability.
|
Thin kerf saw blade for miter saws and table saws. No. 400 grit diamond ground teeth. Alternate top bevel, 1.6mm plate, .095" kerf, 20 degree hook angle, 5,900 max RPM.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf blade for circular and miter saws. Designed for smooth fast cuts. Durable, machine welded carbide tips. Anti-kick back safety feature. C45, 20 degree hook angle, 6,500 RPM.
|
Thin kerf, .095", saw blades are for use with miter saw and table saws. Computer balanced plate reduces vibration for improved accuracy and better finish. Used for all-purpose cutting in natural wood, plywood and wood composites. Alternate top bevel, +5 hook angle, plate .069".
|
Thin kerf saw blade for miter saw and portable tools. Designed for cutting oak, pine, plywood, pressure treated lumber and beams. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For general construction applications, including fast, efficient ripping and crosscutting. Cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding. .098" thin kerf design. 15-degree hook angle. 7,000 max RPM.
|
Thin kerf, .045", design cuts more efficiently. Carbide tipped saw blades cut faster and last longer than conventional carbide blades. Heat treated for longer life. Alternative tooth bevel, .071" plate, +15 degree hook angle.
|
Thin kerf, .098", saw blade for portable tools. Durable MicroGrain Titanium Carbide for razor sharp cuts and long life. Laser cut stabilizer vents for reduced vibration and precise cuts. PermaShield permanent coating prevents gumming and corrosion. Used for rip/crosscut wood, chipboard, plywood or laminate. Alternate top bevel, .071" plate, 15 degree hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf saw blade for circular saws. Alternate top bevel, .2.7mm kerf, 13 degree hook angle.
|
Thin kerf saw blade for miter, table saws and portable tools. Alternate top bevel, .071" plate, .098" kerf, 7,000 max RPM, 15 degree hook angle.
|
Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Teeth alternate between a right and left bevel to form a knife-like edge on either side for a cleaner cut. Alternate top bevel, 15-degree positive hook angle, .098" thin kerf, 7,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Teeth alternate between a right and left bevel to form a knife-like edge on either side for a cleaner cut. 10-degree alternate top bevel, 15-degree positive hook angle, .098" thin kerf, 7,000 rpm.
|
Thin kerf circular saw blade is designed for heavy-duty ripping for under powered saws. Gives fast, glue line rip cuts with less drain on saw and less material waste. Alternate top bevel, +20 degree hook angle, .071" plate, .094" kerf.
|
For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Designed to do both cross-cutting and ripping. Teeth are arranged in a three or five tooth pattern and incorporate a flat raking tooth after each sequence of ATB teeth. 15-degree alternate top bevel plus raker, 15-degree positive hook angle, .098" thin kerf, 7,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf, .126" , circular saw blade. Thick MicroGrain carbide tips. Laser cut blade bodies and expansion slots. Kickback reducing design. TCG (Triple Chip Grind) cutting tip configuration. Used to cut stacks of man-made wood products, hardwood and softwood, 7,000 rpm, +10 degree hook angle, .087" plate.
|
Construction grade carbide teeth for longer life with thin kerf for fast cuts; 400 grit diamond ground teeth for a smooth finish. Precision tensioned and balanced blade.
|
|
|
