|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of high impact polypropylene plastic. Includes four (4) internal compartments to separate rod. Screw-type cap and rubber o-ring provide clean, dry, air-tight storage for electrodes. Store up to 10 Lbs.
|
Prevents weld spatter from adhering to MIG nozzles, contact tips, weld area and work surface.
|
Eliminates erratic operation with a film that will not clog orifices and threads on MIG nozzles and contact tips. Suitable for use on fixtures of semi- and automatic welders. Odorless, non-flammable, non-toxic and silicone free, it will not cause porosity.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
|
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
|
8-3/8" (212.8mm) long with 2" (50.8mm) maximum jaw opening and 2-1/2" - 3" (63.5mm - 76.2mm) depth. Designed to grip a few inches from the end of the metal. Allows weld to start or finish at the end of the joint. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING.
|
These MIG pliers includes seven features for MIG welding applications. The features include: (1) Needle nose pliers grip for pulling, (2) Small serrated hole for MIG tips, (3) Flat surfaces for hammering, (4) Cutter to trim MIG wire, (5) large serrated hole for nozzle, (6) Spring loaded handle and (7) Heavy insulated comfort grip.
|
10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use in welding applications or for holding awkward shapes in place. U- shaped jaws provide enhanced visibility and more working space. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Throat depth 1-3/4", Jaw capacity 1-5/8"; Jaw depth 1-3/4".
|
Made from high grade steel so it's reusable. Four different cuts from each guide: Saddle cut, 45 degree, 22-1/2 degree and 90 degree. Includes a spring loaded hinge. Painted red.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from high grade steel so it's reusable. Four different cuts from each guide: Saddle cut, 45 degree, 22-1/2 degree and 90 degree. Includes a spring loaded hinge. Painted red.
|
Wheel and handle kit for "Forney" 00313 & 00314 ARC Welders (sku #: 890.9400).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits "Forney" 300 series welders and plasma cutters and all similar sized welders. 11-1/2" wide x 27-1/2" tall. 3-levels. Four casters included. 1.0mm thick steel. Max recommended weight capacity: 90 lbs (40.8 Kg).
|
|
|
