|
|
|
|
|
|
|
|
|
|
|
Adapter plate allows replacement of all CB series and MW series heaters. Opening 14-3/4 x 6-3/4. Overall 21-1/2 x 12-1/4.
|
Wall mounted and can be used for operation of all 120/240 volt electric baseboards, heaters and fans. Single Pole: breaks one side of the line. Rated 20 amps, 120/240 volts AC. Adjustable range 500 to 900 F. Recommended for all 120 volt units. Mount in standard deep receptacle box. U.L. Listed.
|
Wall mounted and can be used for operation of all 120/240 volt electric baseboards, heaters and fans. Double Pole: Both sides of the line are disconnected in the off position. Recommended for all 240 volt units and for additional safety with 120 volt units. Mount in standard deep receptacle box. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
For baseboard heaters. Rated 22 amps 120/240 volts. Adjustable from 40 to 100 degrees Fahrenheit.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Quiet convection. 750/1500 watts. Tip-over safety shut-off, thermostat control. Low profile design. ETL/CETL listed. 9-5/8"H x 29-3/8"W x 5-1/2"D.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
For baseboard heaters. Rated 22 amps 120/240 volts. Adjustable from 40 to 100 degrees Fahrenheit.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6" ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 degrees Celsius building wire. 240 volts. U.L. Listed. Thermostat Sold Separately.
|
Size mount switch with free reflector. Warms approximately 120 square feet of room space or a 10' x 12' room. Can be painted to match any wall. Comes in English/French packaging.
|
With built-in thermostat to maintain desired room temperature. Can be painted to match any wall, and plug into a standard outlet. Warms approximately 120 square feet of room space or a 10' x 12' room. Tested and certified to Underwriters Laboratories (UL).
|
|
|
|
|
|
|
|
|
|
|
|
|
Glass panel heater uses advanced X-grid convection heating power to deliver quiet comfortable warmth. Set the desired temperature and the heater warms to that setting. Safety features include a thermal cut-out switch that protects against overheating, and a tip-over switch shuts off. Timer ON and timer OFF button. An on-board thermostat controls the heating output. Can be wall free-standing with casters attached or wall mounted. Includes caster kit for room to room portability. Heavy duty brackets for wall mounting are included. LED temperature and mode display is easy to read. Can be operated using unit's control board or handy remote. 120V-1-60. Dimensions: 32-5/16?W x 3-5/8?D x 17-13/16?H. Heater with caster kit dimensions: 9-15/16?D x 20-1/2?H.
|
Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade - 2200 RPM/70 CFM. Powder coated 20 ga. steel front. Rough in dimensions - 14-1/2''W x 7-1/8''H; 3-1/2'' deep. Single pole built-in thermostat. Unit not approved for ceiling mount applications. Unit can be positioned to allow left, right or top discharge. Grill dimensions: 16-3/4"W x 7-5/8"H.
|
Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade - 2200 RPM/70 CFM. Powder coated 20 ga. steel front. Rough in dimensions - 14-1/2''W x 7-1/8''H; 3-1/2'' deep. Single pole built-in thermostat. Unit not approved for ceiling mount applications. Unit can be positioned to allow left, right or top discharge. Grill dimensions: 16-3/4"W x 7-5/8"H.
|
|
|
|
|
|
|
|
|
|
|
Fan forced and features a heavy-duty heating element with large fin area for maximum heat transfer. High quality nickel chrome wire is sealed in a steel tubular sheath. A simple field conversion to a tamper-resistant feature. Whisper quiet, vane axial fan that has proven to be successful in other products. Rough-in dimensions 19-15/16" H x 14-3/16" W x 4" D. Surface mounting kit is not included. Decorator ivory finish. U.L. Listed. Built-in single pole thermostat. Surface mounting kit can be purchased from the factory, No. 3310EX33R.
|
Fan forced and features a heavy-duty heating element with large fin area for maximum heat transfer. High quality nickel chrome wire is sealed in a steel tubular sheath. A simple field conversion to a tamper-resistant feature. Whisper quiet, vane axial fan that has proven to be successful in other products. Rough-in dimensions 19-15/16" H x 14-3/16" W x 4" D. Surface mounting kit is not included. Decorator ivory finish. U.L. Listed. Built-in single pole thermostat. Surface mounting kit can be purchased from the factory, No. 3310EX33R.
|
|