|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes one water pump model WP10, with 12 foot, 1-1/4" discharge hose. Powered by water, uses no electricity. There are no moving parts and no motors to burn out. Power is regulated by hose bib which pumps to within 1/8" of surface. Non-corrosive and uses 1-1/4" or 1-1/2" discharge hose. Pumps approximately 800 gallons of water per hour. Safe and easy to use. Boxed.
|
Manual, submersible pump. Ideal for dewatering applications. Reinforced thermoplastic construction will not rust or corrode. Screened bottom intake design removes water to within 3/16" of surface. 1300 GPH.
|
1/4 HP split capacitor motor - high efficiency - Low amp draw, 10' grounded waterproof power cord, pumps up to 30 gallons per minute, 1800 gallons per hour, side and bottom intake provides for clog resistant suction, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4" male iron pipe discharge thread, standard hose adapter included. One year warranty from Superior Pump Co.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rugged thermoplastic body resists corrosion and impact. Portable and versatile for a variety of applications. Pumps up to 1320 GPH. Self-cleaning screen reduces maintenance. Cord wrap feature for organized storage and portability. Easy to use - includes 8' power cord and garden hose adapter. CSA certified.
|
Submersible utility pump - ideal for removing unwanted water to 3/16" depth. Thermoplastic construction for the highest corrosion-resistance. Includes 8' power cord, and garden hose adapter. CSA certified.
|
1/5 HP reinforced thermoplastic submersible utility pump. Assembled in the US with foreign and domestic parts. Pumps dirty water with small (1/2 in.) solids. Removes water down to 3/8 in. of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. Max flow rate is 1800 GPH at 0 ft. 1 1/4 in. discharge with 3/4 in. garden hose adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 HP reinforced thermoplastic submersible utility pump. Assembled in the US with foreign and domestic parts. Lifts water over 25 ft. Removes water down to 1/8 in. of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. Max flow rate is 1050 GPH at 0 ft. 3/4 in. bronze garden hose adapter at discharge.
|
Continuous duty, thermally protected - split capacitor motor. Pumps will lift water up to 25' of vertical height. Tough thermoplastic construction, Large 1-1/4" top discharge for high capacity pumping. Garden hose adapter included. Can be used as a sump pump by adding an optional float switch. 4.1 amps, handles 1/8" solids. Pumps up to 40gpm/2400gph. 1 year wrranty from Superior Pump.
|
Designed to Drain basements, pools, spas, etc., water cooled, garden hose discharge, bottom suction to 1/8" depth, 9' cable grounded power cord. Non-corrosive Noryl pump body. Maximum flow of 740 US GPH.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight and portable. Includes 6'? suction hose, suction attachment, extra impeller and gasket, 6' power cord, convenient carrying handle, 3/4" garden hose connections, self-priming up to 7' depth. Works great for draining water heaters, water beds, washing machines, or for filling radiant heating systems. Pumps up to 330 gallons per hour, 1/10 HP 115 Volt fan cooled AC ? 2.3 AMPS, built-in thermal overload protection for safety, permanently lubricated motor bearings. Discharge height/gallons per hour: 0'/330, 10'/270, 20'/198, 30'/114, 35'/60. 8.4 AMPS, NOT recommended for use as sprinkler pump. 1 year warranty from Superior pump.
|
Submersible utility pump for removing unwanted water down to 3/16" depth. Thermoplastic construction for the highest corrosion-resistance. High-output performance, pumps up to 1470 GPH. Removable inlet screen for easy cleaning. Includes 8' power cord and garden hose adapter. CSA certified.
|
Heavy-duty aluminum construction maximizes pump life. Portable and versatile - can be used in a variety of areas: window wells, basements, rooftops, etc. Pumps up to 1320 GPH. Self-cleaning screen reduces maintenance. Easy to use - includes 8' power cord and garden hose adapter. CSA certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-submersible, multi-purpose pump - designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks. Pumps up to 350 GPH. Pumps down to 1/8". Corrosion resistant compact construction maximizes pump life. Self-priming at 6' vertically, pump will push water 40' high. Easy to use - includes 6' power cord, 6' garden hose and suction attachment. CSA certified.
|
Utility pump with hose and puddlescoop,, 3/4" NPT discharge for garden hose. Ideal for removing water from flat area, dewatering aquariums, water beds. Capacity: 450 GPH/5', 275 GPH/20', 75 GPH/40'. 6 lbs (2.7 kg).
|
Non-submersible, multi-purpose pump - designed for a variety of applications: emergency draining, emptying water-logged septic systems, water garden supply and water transferring. Pumps up to 450 GPH. Pumps down to 1/8". Corrosion resistant compact construction maximizes pump life. Easy to use - includes 6' garden hose, 6' battery clamp motor cord, and suction attachment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Continuous duty, thermally protected - split capacitor motor. Pumps will lift water up to 25' of vertical height. Tough thermoplastic construction. Large 1-1/2" discharge for high capacity pumping. Garden hose adapter included. Can be used as a sump pump by adding an optional float switch. 4.9 amps, side sdischarge, stainless steel impeller, handles 3/8" solids, 10' cord. Pumps up to 55gpm/3300gph. 3 year warranty from Superior Pump.
|
Pumps 1200 GPH at 1 ft. Quiet operation for a better indoor experience. Corrosion and rust resistant epoxy-coated cast aluminum pump housing. Removes water to within 1/8" of surface. Bottom intake design with pre-screen to protect against debris
|
1/2 HP cast iron transfer pump. Assembled in the US with foreign and domestic parts. Generates up to 50 PSI at outlet hose; generates up to 15 ft. of suction lift at inlet hose. Rugged, cast iron pump and motor housing. Non-submersible. Max flow rate is 1450 GPH at 0 ft. 3/4 in. garden hose adapters at inlet and discharge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Automatic submersible utility pump - checks for water automatically - senses water at 3/4" and pumps down to 1/4". Pumps up to 1800 GPH. Smart electronic sensor - innovative monitor checks for water every 2-1/2 minutes and shuts off when none is detected. One time installation - just plug and pump. Easy to use - includes 15' power cord and garden hose adapter. CSA certified.
|
Pumps 1200 GPH at 1 ft. Quiet operation for a better indoor experience. Corrosion and rust resistant epoxy-coated cast aluminum pump housing. Removes water to within 1/8" of surface. Bottom intake design with pre-screen to protect against debris
|
Complete, compact system, perfect for basement wet bars, laundry and utility sinks. Easy install - eliminates the need for traps, vents and costly labor. Quiet, trouble-free operation. Easily mounts beneath your sink. CSA certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use as a portable sprinkler or water transfer pump. Ideal for boosting pressure to wash cars, boats, and lawn sprinkling. Supports multiple lawn sprinklers pumping from lakes, streams or ponds. Maximum pumping capacity to 10 gallons per minute. Pressures to 80 PSI, suction lifts to 20'. Continuous duty rated, 1 HP, 115V motor. Stainless steel pump housing with excellent self-priming capability. 1" threaded suction and discharge, garden hose fitting and 6' power cord included.
|
EconoAg series 2" transfer pump of Thermoplastic glass-filled polyester construction with stainless steel internal fasteners. Briggs & Stratton Intek OHV engine. Up to 25' suction lift, 190 GPM transfer fluid rate and 120' TDH.
|
Remote operation gas engine pump. Easy portability - compact construction for water transfer in remote locations. Corrosion resistant - maximizes pump life. Manual throttle, choke, fuel valve and engine shut-off controls. Pumps up to 141 GPm. Base mounting holes - allow for permanent mount. Built in check valve, and automatic safety cut-off when engine level is low.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EconoAg series 2" transfer pump of thermoplastic glass-filled polyester construction with stainless steel internal fasteners. Briggs & Stratton engine. Up to 25' suction lift, 145 GPM transfer fluid rate and 100' TDH.
|
Synthetic rubber wear parts and semi-vortex impeller for maximum durability. V-ring protects the shaft seal from abrasives. Easy to disassemble with one 12mm box/socket wrench. Vertical or horizontal discharge. 2 year commercial warranty. Rental.
|
Compact reliable design. Heavy-duty Honda gas engine with oil sensor. Cast iron impeller and volute casing last long and require low maintenance. Durable rolled-steel frame provides pump/engine with maximum protection, ease of handling or transport, and safe operation. Silicon carbide mechanical seal. Pump/engine set mounted to cage frame on rubber vibration cushion to buffer stress and wear. 2 year commercial warranty.
|
|
|
