Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS > THREAD SEALANT COMPOUNDS
Sort By:
1 2
Oatey 31226 Pipe Joint Compound Harvey 030005-144 Pipe Thread Compound Harvey's 023015-48 Pipe Joint Compound
Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic; may be used on water, natural gas, steam and air lines. Perfect for applying gaskets to flanges. Not for use on plastic threads. Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Oatey 31229 Great White Harvey's 029035 Pipe Thread Compound Plumb Pak PP854-2 Pipe Joint Compound
Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Gray, Tthixotropic, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle.
Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Rectorseal 25790 Pipe Thread Sealant Oatey 31230 Great White
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included.
Plumb Pak PP854-1 Pipe Thread Sealant Harvey's 023030 Pipe Joint Compound Harvey's 025020 Pipe Thread Compound
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50 degrees F to +500 degrees F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. NSF certified. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Brushtop bottle. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle.
Brass Craft PS1087 Seal 'N Check Kit Rectorseal 31631 Tru-Blu Oatey 15420 Pro Dope
Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732. Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Harvey's 029048 Pipe Thread Compound Rectorseal 23631 T-Plus 2 Rectorseal 25631 Pipe Thread Sealant
Gray, Tthixotropic, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Oatey 15615 Hercules Pipe Thread Sealant Oatey 15804 Hercules Pipe Thread Sealant Harvey's 023045 Pipe Joint Compound
Multi-purpose thread sealant formulated with the highest percentage PTFE content on the market. PTFE particles fill cracks and tiny thread imperfections - providing superior lubricating and sealing properties. Leak-free joints can be tested and put into service immediately. Holds tight against vibration, expansion, and contraction. Brushable; non-separating; will not run or drip from joints. Soft set; no cure time required. Withstands temperatures from -50 deg F to 500 deg F (on steel pipe), and pressures of 12,000 psi (hydraulic), 2600 psi (gas). For use with liquids, including acids and alkalis and gases (except oxygen). For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Superior anti-galling properties with stainless steel. Excellent resistance to strong acids, alkalis and ketones. Non-flammable and contains no heavy metals or volatile solvents. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Low VOC. Meets Fed. Spec. TT-S-1732. White. For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50 degrees F to +500 degrees F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. NSF certified. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Brushtop bottle.
Harvey's 025050 Pipe Thread Compound Oatey 15510 Hercules Oatey 15427 Pro Dope
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. An all-purpose, tough, pliable, non-petroleum based seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. Brushable; non-separating; will not run or drip from joints. Sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel; and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Apply to pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), other gases (except oxygen), liquids and chemicals. Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for hands towels. Performs over a temperature range of -50 deg to 400 deg F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Certified to ANSI/NSF Standard 61, safe for drinking water lines. Conforms to Mil. Spec. Mil-S-45180 D. Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Rectorseal 23551 T-Plus 2 Pipe Thread Sealant Rectorseal 25551 Pipe Thread Sealant Oatey 15806 Hercules Pipe Thread Sealant
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732.
Oatey 15703 Hercules Oatey 15515 Hercules Pipe Thread Sealant Oatey 15620 Hercules Pipe Thread Sealant
All-purpose, tough, pliable seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. An excellent gasket seal - sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. Seals old or worn fittings. Ideal for pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), anti-freeze, refrigerants except ammonia, lubricants, glycerin, solvents, brine and other gases, liquids and chemicals. For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Provides leak-proof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Grit-free; non-separating, distinctive non-runny consistency. Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for hands towels. Performs over a temperature range of -50 deg to 450 deg F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Conforms to Mil. Spec. Mil-S-45180 D. Blue. An all-purpose, tough, pliable, non-petroleum based seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. Brushable; non-separating; will not run or drip from joints. Sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel; and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Apply to pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), other gases (except oxygen), liquids and chemicals. Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for hands towels. Performs over a temperature range of -50 deg to 400 deg F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Certified to ANSI/NSF Standard 61, safe for drinking water lines. Conforms to Mil. Spec. Mil-S-45180 D. Multi-purpose thread sealant formulated with the highest percentage PTFE content on the market. PTFE particles fill cracks and tiny thread imperfections - providing superior lubricating and sealing properties. Leak-free joints can be tested and put into service immediately. Holds tight against vibration, expansion, and contraction. Brushable; non-separating; will not run or drip from joints. Soft set; no cure time required. Withstands temperatures from -50 deg F to 500 deg F (on steel pipe), and pressures of 12,000 psi (hydraulic), 2600 psi (gas). For use with liquids, including acids and alkalis and gases (except oxygen). For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Superior anti-galling properties with stainless steel. Excellent resistance to strong acids, alkalis and ketones. Non-flammable and contains no heavy metals or volatile solvents. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Low VOC. Meets Fed. Spec. TT-S-1732. White.
   
 
1 2