|
|
|
|
|
|
|
|
|
|
|
Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
|
Yellow handle. 1/2 PSI maximum working pressure.
|
Yellow handle. 1/2 PSI maximum working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 PSI maximum working pressure.
|
Yellow handle. 1/2 PSI maximum working pressure.
|
Gas appliance connector with lever handle. AGA Design Certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
Yellow handle. 1/2 PSI maximum working pressure.
|
Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16
|
-20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1
|
|
|
|
|
|
|
|
|
|
|
|
|
-20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1
|
Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16
|
Yellow handle. 1/2 PSI maximum working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
|
Yellow handle. 1/2 PSI maximum working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
Yellow handle. 1/2 PSI maximum working pressure.
|
Gas appliance connector with lever handle. AGA Design Certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged brass 1-piece body. Chrome plated forged brass ball. Coated aluminum handle. 9/16''-24 fine thread flare for 3/8'' tube. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. Threaded flare ends comply with SAE F513. UPC coded bulk.
|
-20 Deg. F ? 300 Deg. F temperature range, quarter-turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance, multi-directional flow, two-piece body design, chrome-plated brass ball, CSA - ANSI Z21.15, (1/2 PSIG), ANSI/ASME B16.44 (5G), UL listed, threaded ends comply with ANSI B1.20.1. Rated for 200 PSI
|
Yellow handle. 1/2 PSI maximum working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
-20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1
|
Yellow handle. 1/2 PSI maximum working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
1-piece body, chrome-plated forged brass ball, coated aluminum handle. Threaded ends comply with ANSI B1.20.1. CSA Certified. Threaded flare ends comply to SEA J513. CSA Z21 (PSIG) certified.
|
Yellow handle. 1/2 PSI maximum working pressure.
|
Temperature and pressure relief valve. Relieves pressure up to 150 psi/210F. 3/4 inlet/outlet, copper alloy body, 3-5/16" shank.
|
|