TEST CAPS & PLUGS

Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR > TEST CAPS & PLUGS

Sort By:


Oatey Knock-Out DWV Test Cap, 1-1/2 in, 17 psi, ABS, White Our Price: $0.68	Oatey Knock-Out DWV Test Cap, 2 in, 17 psi, ABS, Yellow Our Price: $0.89	Oatey Knock-Out DWV Test Cap, 4 in, 17 psi, ABS, White Our Price: $0.99

Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.	Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.	Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.


Oatey Knock-Out DWV Test Cap, 3 in, 17 psi, ABS, White Our Price: $1.13	Fernco PlumQuick DWV Flexible Pipe Cap, 1-1/2 in, 4.3 psi, 1-57/64 in Dia, PVC Our Price: $2.99	Worldwide Sourcing TC-15 Pipe Test Cap, 1-1/2 in, PVC Our Price: $3.22

Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.	Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque.	For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.


Fernco PlumQuick DWV Flexible Pipe Cap, 2 in, 4.3 psi, 2-25/64 in Dia, PVC Our Price: $3.49	Worldwide Sourcing TC-2 Pipe Test Cap, 2 in, PVC Our Price: $3.84	Oatey 33400 Mechanical Test Plug, 1-1/2 in, 5 psi Back, Plastic, Red, 110 deg F Our Price: $3.99

Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque.	For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.	Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG


Worldwide Sourcing TC-3 Pipe Test Cap, 3 in, PVC Our Price: $4.70	Oatey 33401 Mechanical Test Plug, 2 in, 5 psi Back, Plastic, Red, 110 deg F Our Price: $4.79	Fernco PQC-103 DWV Flexible Pipe Cap, 3 in, 4.3 psi, PVC Our Price: $4.79

For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.	Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG	Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque.


Fernco PlumQuick DWV Flexible Pipe Cap, 4 in, 4.3 psi, 4-33/64 in Dia, PVC Our Price: $5.16	Oatey 33402 Mechanical Test Plug, 3 in, 5 psi Back, Plastic, Red, 110 deg F Our Price: $5.69	Worldwide Sourcing TC-4 Pipe Test Cap, 4 in, PVC Our Price: $5.94

Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque.	Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG	For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.


Oatey 33403 Mechanical Test Plug, 4 in, 5 psi Back, Plastic, Red, 110 deg F Our Price: $6.99

Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG


	1