|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to join straight lengths of CPVC tubing.
|
SLIP X SLIP Used to change direction in piping.
|
Used to join straight lengths of CPVC tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to provide a branch supply line from a main line.
|
Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.
|
Used to reduce from fitting socket to CPVC tubing. Bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle. No.52907 is 3/4" x 1/2" reducing elbow as well as 3/4" street elbow. Bagged.
|
Used to join straight lengths of CPVC tubing to smaller size tubing.
|
Used to change direction in piping. Sometimes used in conjunction with a 12"L CPVC tubing on long runs to absorb expansion. Bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Sometimes used in conjunction with a 12"L CPVC tubing on long runs to absorb expansion. Bagged.
|
Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.
|
SLIP X SLIP Used to change direction in piping.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to provide a branch supply line from a main line.
|
Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle. No.52907 is 3/4" x 1/2" reducing elbow as well as 3/4" street elbow. Bagged.
|
Used to change direction in piping and features lugs for fastening. Often used in conjunction with No.530671 washer hose valve for hooking up to automatic clothes washers and for fabricating water supply piping stub outs for toilet installation. Sometimes called a Drop Ear elbow.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts from 1/2" CPVC to 1/2" male metal pipe thread and features lugs for fastening. Used on tub and shower faucets to adapt from 1/2" CPVC riser to shower arm. Sometimes called a Drop Ear elbow. Hand tighten only; seals by means of a special elastomeric gasket to ensure leakproof seal, use of joint compound or Teflon tape is neither necessary or recommended.
|
Used to adapt metal MIP threaded fittings to CPVC. Hand tighten only; seals by means of a special elastometric gasket at base of threads to ensure a leakproof seal; use of joint compound or Teflon tape is neither necessary nor recommended. Bagged.
|
Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule.
|
Solvent welds directly into 1/2'' CPVC fitting socket and adapts to female hose coupling.
|
Used to provide a branch supply line from a main line.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SLIP X SLIP Used to change direction in piping.
|
Used to join straight lengths of CPVC tubing.
|
Used to join straight lengths of CPVC tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows a direct 90 degree connection between CPVC tubing and male running threads on faucet. Has a cone washer inside female end to achieve seal. Slip x female NPSM.
|
Provides a 90 degree change in direction of the male running threads on a faucet. Has a cone washer inside female end to achieve seal. MALE NPSM X FEMALE NPSM.
|
Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" O.D. PEX tubing or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through floor to 3/8" O.D. closet or lavatory riser tubes. Can also be used with metal risers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer.
|
SLIP X SLIP Used to change direction in piping.
|
Allows any fitting hub to be reduced to accept PEX, copper or CPVC tubing
|
|
|
