|
|
|
|
|
|
|
|
|
|
|
|
|
|
Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
|
Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nonmetallic threaded switch box with five 1/2" threaded holes, for exposed applications with nonmetallic wiring systems only. Mounting feet included. 4" diameter. 13.5 cubic inch capacity.
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
|
Made of 16 gauge steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of 16 gauge steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
|
Non-metallic PVC floor box. Water tight gasket and corrosion resistant hardware. Concrete or wood subfloor construction approved. Minimum concrete dept required is 3-1/2". Will provide optional low voltage divider permitting three services (data, telephone, and power) access. Accepts 1/2", 3/4" and 1" conduit and has PVC molded ports. Includes two 1" x 3/4", two 3/4" x 1/2" reducer plugs and two 1" and 3/4" hubs. 90 cubic inch capacity.
|
Duplex outlet with ABS cover and dual hinge caps to keep out dust. Adjusts from 0" to 1-7/8", 21 cubic inch capacity. UL Listed 5274 and classified 2HR W/C. UL514C scrub water tested. Patented residential design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes box, gasket, receptacle, brass cover plate and closure cap with rubber "O" ring. Can be used in industrial and residential environments. UL Listed.
|
Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction.
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
|
|
|
|
|
Flush floor mount, for duplex or GFCI receptacle, used with Carlon floor box E971FB. Solid brass cover, plastic adapter ring, gasket and everything needed for installation is included. (Receptacle sold separately).
|
|
|
