|
|
|
|
|
|
|
|
|
|
|
GFCI circuit breaker offers protection of entire branch circuits where damp-location shock hazards may exist, as well as Class A overload and short-circuit protection. Class A denotes a GFCI that will trip when a fault current to ground is 5 milliamperes or more. Yellow push to test button. CSA approved to only install in Canadian HomeLine loadcentres. Rated 10,000 AIR and 120/240 VAC.
|
Continuously monitors the circuit and quickly turns off the power (trips) when a dangerous condition is detected. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
Continuously monitors the circuit and quickly turns off the power (trips) when a dangerous condition is detected. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
|
|
|
|
|
|
|
|
|
|
|
|
GFCI circuit breaker offers protection of entire branch circuits where damp-location shock hazards may exist, as well as Class A overload and short-circuit protection. Class A denotes a GFCI that will trip when a fault current to ground is 5 milliamperes or more. Yellow push to test button. CSA approved to only install in Canadian HomeLine loadcentres. Rated 10,000 AIR and 120/240 VAC.
|
|
Designed for use on circuits where contact with water or another ground is possible while using an electrical device. One inch module, 10,000 AIR, 5 milli-amp (.005 amp) ground fault trip level. Push to test button. May be used when marked to accept with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger. 60 Hz. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Continuously monitors the circuit and quickly turns off the power (trips) when a dangerous condition is detected. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
Continuously monitors the circuit and quickly turns off the power (trips) when a dangerous condition is detected. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Combination Arc Fault protection and Ground Fault protection (class A) in a single device. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
Combination Arc Fault protection and Ground Fault protection (class A) in a single device. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
Combination Arc Fault protection and Ground Fault protection (class A) in a single device. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Combination Arc Fault protection and Ground Fault protection (class A) in a single device. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
Automatically senses hot wire-to-ground faults and shuts off the power. Auto-monitoring function provides periodic automatic testing of GFCI. If the self-test detects that GFCI protection might be compromised it indicates an alert.10 kAIC capacity.
|
Automatically senses hot wire-to-ground faults and shuts off the power. Auto-monitoring function provides periodic automatic testing of GFCI. If the self-test detects that GFCI protection might be compromised it indicates an alert.10 kAIC capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
Protects against shock hazard where water and electricity are present. 120 / 240 volts. UL listed. 1 pole, 1" wide.
|
Tin plated copper stab to create a reliable, permanent and corrosion resistant connection. Ensures its ground circuitry is functioning properly by automatically running diagnostic testing on a periodic basis. Should a problem be detected, the circuit breaker will trip and will need to be replaced. Unit provides protection against overloads, short circuits and ground faults. Class A 5mA ground fault circuit interrupter. Wire range is #14-8 AWG CU/#12-8 AWG AL. UL Listed. 4.5" height x 1.25" width x 3" depth, .479 lb.
|
Tin plated copper stab to create a reliable, permanent and corrosion resistant connection. Ensures its ground circuitry is functioning properly by automatically running diagnostic testing on a periodic basis. Should a problem be detected, the circuit breaker will trip and will need to be replaced. Unit provides protection against overloads, short circuits and ground faults. Class A 5mA ground fault circuit interrupter. Wire range is #14-8 AWG CU/#12-8 AWG AL. UL Listed. 4.5" height x 1.25" width x 3" depth, .479 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tin plated copper stab to create a reliable, permanent and corrosion resistant connection. Ensures its ground circuitry is functioning properly by automatically running diagnostic testing on a periodic basis. Should a problem be detected, the circuit breaker will trip and will need to be replaced. Unit provides protection against overloads, short circuits and ground faults. Class A 5mA ground fault circuit interrupter. Wire range is #14-8 AWG CU/#12-8 AWG AL. UL Listed. 4.5" height x 1.25" width x 3" depth, .479 lb.
|
Combination Arc Fault protection and Ground Fault protection (class A) in a single device. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
Combination Arc Fault protection and Ground Fault protection (class A) in a single device. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Combination Arc Fault protection and Ground Fault protection (class A) in a single device. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
Combination Arc Fault protection and Ground Fault protection (class A) in a single device. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.
|
For use on circuits where contact with water or another ground is possible while using an electrical device. 120 volt, 1 pole circuit breakers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Intended for protection of entire branch circuits where damp-location shock hazards may exist. The unit features a thermal-magnetic tripping mechanism with a red Visi-Trip indicator to identify a tripped breaker. 120 volt, 10,000 AIR. 1 space per breaker. CSA approved to only install in Canadian Square D loadcentres.
|
One 3/4" space required, 120 volt, 10,000 AIR. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Automatically senses hot wire-to-ground faults and shuts off the power. Auto-monitoring function provides periodic automatic testing of GFCI. If the self-test detects that GFCI protection might be compromised it indicates an alert.10 kAIC capacity.
|
Intended for protection of entire branch circuits where damp-location shock hazards may exist. The unit features a thermal-magnetic tripping mechanism with a red Visi-Trip indicator to identify a tripped breaker. 120 volt, 10,000 AIR. 1 space per breaker. CSA approved to only install in Canadian Square D loadcentres.
|
Intended for protection of entire branch circuits where damp-location shock hazards may exist. The unit features a thermal-magnetic tripping mechanism with a red Visi-Trip indicator to identify a tripped breaker. 120 volt, 10,000 AIR. 1 space per breaker. CSA approved to only install in Canadian Square D loadcentres.
|
|