|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cures between engaged threads to resist leakage, shock and vibration. Formulated for bonding similar and dissimilar materials. For applications requiring keeping nuts and bolts from loosening, yet allowing removal when needed. Non-shrinking formula, will not crack. Temperature and chemical resistant. Sets in 1 hour. 1,600 psi bond strength. Remove with ordinary tools.
|
Use for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs. For all 1/4" to 3/4" diameter nut and bolt assemblies. Locks and seals while preventing parts loosening due to vibration. Resists virtually all leakage, shock and vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Resists light oils and chemicals and dripping from threads during assembly. -65 to 300 degrees Fahrenheit temperature resistance range.
|
Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved.
|
Designed for the permanent locking and sealing of threaded fasteners. Cures when confined in the absence of air between close fitting metal surfaces. Protects threads from rust and corrosion and prevents loosening from shock and vibration. Removable once cured by heating up parts to 500-degrees Fahrenheit. Use on metal fasteners up to 1" dia.
|
All purpose medium strength thread locker, will not run or drip. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch. Protects threads from corrosion, removable with hand tools for easy disassembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs. For all 1/4" to 3/4" diameter nut and bolt assemblies. Locks and seals while preventing parts loosening due to vibration. Resists virtually all leakage, shock and vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Resists light oils and chemicals and dripping from threads during assembly. -65 to 300 degrees Fahrenheit temperature resistance range.
|
Use for cylinder block and rocker arm studs, ring gear bolts, frame bolts and shock absorber bolts. For all 1/4" to 3/4" diameter nut and bolt assemblies where future disassembly is improbable. For permanently locking studs and press fits; adds 3000 psi on slip and press fit assemblies; replaces set screws and snap rings. Locks against vibration loosening. Resists virtually all leakage, shock and vibration. Protects threads from corrosion. Requires extra effort or special tools for removal. Resistant to chemicals. -65 to 300 degrees Fahrenheit temperature resistance range. Heavy duty.
|
High strength thread locker for heavy-duty applications, will not run or drip. Well-suited for permanently locking studs and press fits. 3,000 psi holding on slip and press fit assemblies. May require heat or special tools for removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gel formula provides "liquid-reliability" without drips, globs, mess or waste. For all nut and bolt applications 1/4 inch to 3/4 inch. Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Mil-Spec (S-46163A) Type II, Grade N.
|
Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved.
|
Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for camshaft sprocket bolts, crankshaft bolts, idler bearings, press fit filler tubes, transmission input and output shaft threads and ring gear or shock bolts. For all 3/8" to 1" diameter nut and bolt assemblies. Seals against leakage; prevents bolts and press fits from loosening due to shock, severe vibration and heat stress. Protects threads from corrosion. Removable with hand tools for easy disassembly. Resistant to chemicals and dripping from threads during assembly. For newer engines and high-performance applications that require extreme temperature resistance. -65 to 450 degrees Fahrenheit temperature resistance range. Heavy duty.
|
All purpose medium strength thread locker. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch. Protects threads from corrosion. Removable with hand tools for easy disassembly.
|
High strength thread locker for heavy-duty applications 3/8 inch to 1 inch. Well-suited for permanently locking studs and press fits. Adds 3,000 psi holding power on slip and press fit assemblies. May require heat or special tools for removal.
|
|
|
