Home > PAINT & SUNDRIES > SUNDRIES > ROOF & DRIVEWAY > ROOF COATINGS
Sort By:
1
Henry Premier Fibered Asphalt Roof Coating Henry Roofers Choice Fibered Roof Coating Henry 107 Non-Fibered Asphalt Emulsion Sealer/Dampproofer
Use for resurfacing and rejuvenating old, worn roofs. Resaturates and extends roof life. Use on asphalt roofs, metal roofs and composition roofs. Heavy-bodied asphalt coating, reinforced with non-asbestos fibers. Cures to a tough, flexible, weather resistant film. Resists damage from minor expansion and contraction by weather, temperature, and normal building vibration. Covers 60-100 per sq. ft. per gallon depending on surface type. Not for sale in California. For gutters and flashings. Designed to penetrate and saturate flat built-up and composition roofs. Provides a tough, durable, weather-resistant film. Contains non-mineral fibers. Can be used at lower temperatures. Not formulated for use on any surface other than horizontal FLAT. In hot weather, this product may flow from sloped surfaces. Not recommended for use on wood or asphalt shingles. Covers 100 sq. ft per 1.5 gallons. Depending on texture and porosity of surface. Not for sale in California. Black. Use as a protective roof coating for new or existing composition roofs with smooth surfaces, as a base coat for reflective coatings, waterproofing adhesive for polyester systems, and as an anti-corrosive protection for metal roofs, steel structures, pipes, and tanks above or below ground level. Solvent free, asphalt emulsified with Bentonite clay and water. Applied cold, non-flammable while wet, corrosion-resistant, and waterproof when dry. Does not crack, run, or sag under extreme weather conditions. Complies with ASTM D-1227-95 Type III, Class I. U.L Classified. FM approved. Covers approximately 100 sq ft per 3-4 gallons when applied as one coat.
Quikdry 104Q Asphalt Spray Primer Solar Flex 287 Non-Fibered Elastomeric Roof Coating Gardner-Gibson SK-7801 Sta-Kool Elastomeric Roof Coating
Used on edging and flashings, weathered composition roofing, concrete, and masonry surfaces prior to the use of solvent based asphalt coatings or adhesives. Covers 33 sq. ft. per can depending on porosity of surface. Specially formulated to resist mildew in hot humid climates. Reflects sun's heat and UV rays. Reduces air-conditioning cost and lowers roof and interior temperatures.  Apply brush, roller or spray application. Apply two coats of 1 gallon per 100 sq. ft. for each coat. Allow it to dry between 2 coats. Advanced waterproofing technology, reduces heat-build up, professional grade. Product forms a thick, rubberized shield that expands and contracts to prevent cracking and roof damage. Provides a highly protective barrier which reflects the sun's UV rays. Covers approximately 50-75 sq. ft. per gallon per coat. Meets Energy Star performance ratings.
Aqua-Brite 558 Aluminum Roof Coating Henry SS003 Fibered Roof Coating Henry Roofers Choice Fibered Roof Coating
Can be used as a reflective coating for smooth surfaced built-up roofing and Modified Bitumen Membranes. Combination of premium aluminum flakes suspended in emulsified asphalt providing weathering resistance and reflectance. Reduces surface temperature and penetration of the sun's actinic rays to the roof surface. Helps reduce interior temperature and asphalt oxidation, and rapid thermal dimensional changes. Covers 1.5 gallons per 100 sq. ft. on smooth surface. Coverage varies with surface texture. A heavy bodied cutback asphalt coating, reinforced with synthetic fibers. The coating cures to a tough, weather resistant film. It has good adhesion to brick, concrete and steel, and because of its ability to retain its pliability, this coating resists damage which may result from expansion and contraction caused by weather, temperature variations, and normal building vibrations. Excellent material for surfacing most asphalt based or metal roofs. It is recommended for resurfacing weathered asphalt roof surfaces. Aged asphalt roof surfaces are rejuvenated as the coating penetrates the worn asphalt substrates helping to restore its original properties. NOT recommended for use with coal tar roofs. Approximately 50 sq. ft. per gallon. Coverage rate varies depending on texture and porosity of surface. For gutters and flashings. Designed to penetrate and saturate flat built-up and composition roofs. Provides a tough, durable, weather-resistant film. Contains non-mineral fibers. Can be used at lower temperatures. Not formulated for use on any surface other than horizontal FLAT. In hot weather, this product may flow from sloped surfaces. Not recommended for use on wood or asphalt shingles. Covers 100 sq. ft per 1.5 gallons. Depending on texture and porosity of surface. Not for sale in California. Black.
Henry Roofers Choice Fibered Cold Process Roof Coating Henry Premier Fibered Asphalt Roof Coating Henry Premier Asphalt Non-Fibered Roof Coating
Brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. Designed for bonding layers of asphalt coated base sheets. Eliminates burn and fire hazards of hot asphalt. U.L. Class A in a variety of roof systems. Use in applications with 25# or heavier asphalt-coated fiberglass base sheets, conventional mineral surface cap sheet, polyester fabric and bonding gravel or granule surfacing. Coverage varies with smoothness and porosity of surface coated. Use for resurfacing and rejuvenating old, worn roofs. Resaturates and extends roof life. Use on asphalt roofs, metal roofs and composition roofs. Heavy-bodied asphalt coating, reinforced with non-asbestos fibers. Cures to a tough, flexible, weather resistant film. Resists damage from minor expansion and contraction by weather, temperature, and normal building vibration. Covers 60-100 per sq. ft. per gallon depending on surface type. Not for sale in California. Cures to a tough, flexible, weather resistant film. Use for resurfacing and rejuvenating old, worn out flat roofs. Use on low slope asphalt roofs, metal roofs and composition roofs or adjoining concrete, brick and steel surfaces. Covers 100 sq. ft per 1.5 to 2  gallons on smooth surface. Coverage varies with surface texture.
Henry 107 Non-Fibered Asphalt Emulsion Sealer Henry Roofers Choice Fibered Cold Process Roof Coating Solar Flex 287 Non-Fibered Elastomeric Roof Coating
Use as a protective roof coating for new or existing composition roofs with smooth surfaces, as a base coat for reflective coatings, waterproofing adhesive for polyester systems, and as an anti-corrosive protection for metal roofs, steel structures, pipes, and tanks above or below ground level. Solvent free, asphalt emulsified with Bentonite clay and water. Applied cold, non-flammable while wet, corrosion-resistant, and waterproof when dry. Does not crack, run, or sag under extreme weather conditions. Complies with ASTM D-1227-95 Type III, Class I. U.L Classified. FM approved. Covers approximately 100 sq ft per 3-4 gallons when applied as one coat. Brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. Designed for bonding layers of asphalt coated base sheets. Eliminates burn and fire hazards of hot asphalt. U.L. Class A in a variety of roof systems. Use in applications with 25# or heavier asphalt-coated fiberglass base sheets, conventional mineral surface cap sheet, polyester fabric and bonding gravel or granule surfacing. Coverage varies with smoothness and porosity of surface coated. Specially formulated to resist mildew in hot humid climates. Reflects sun's heat and UV rays. Reduces air-conditioning cost and lowers roof and interior temperatures.  Apply brush, roller or spray application. Apply two coats of 1 gallon per 100 sq. ft. for each coat. Allow it to dry between 2 coats.
Gardner-Gibson SK-7005 Elastomeric Roof Coating Gardner-Gibson SK-7705 Sta-Kool Elastomeric Roof Coating Henry 787 Elastomulsion Damproofing
A flexible acrylic coating that resists cracking and peeling while extending the life of the roofing substrate. Provides a protective barrier which reflects the sun's heat and destructive UV rays. This helps to cool roof surfaces and may cause a reduction of interior temperatures. Covers approximately 50-75 sq ft per gallon per coat. A premium, highly flexible, white acrylic latex roof coating. Reduces heat build-up, thick high-hide formula, expands and contracts. Resists cracking and peeling, provides a protective barrier which reflects the sun's heat and destructive UV rays. Coverage area 50-75 sq. ft. per gallon per coat. Meets Energy Star performance ratings. Seamless rubberized asphalt membrane, for use in waterproofing or dampproofing concrete and masonry surfaces above and below grade. Excellent adhesion to most concrete surfaces such as concrete, brick, stone, wood, or metal. Retains flexibility in wide temperature range. Cold applied by trowel, brush, or spray; requires no special equipment such as kettles. Non-flammable. Coverage: Apply at a rate of 25 sq. ft. per gallon for a wet film thickness of 64 mils (dry film thickness of 45 mils). Dries to touch in 8 hours, sets in approximately 24 hours.
Gardner-Gibson SK-7001 Elastomeric Roof Coating Gardner-Gibson SK-7805 Sta-Kool Elastomeric Roof Coating Gardner-Gibson SK-7701 Sta-Kool Elastomeric Roof Coating
A flexible acrylic coating that resists cracking and peeling while extending the life of the roofing substrate. Provides a protective barrier which reflects the sun's heat and destructive UV rays. This helps to cool roof surfaces and may cause a reduction of interior temperatures. Covers approximately 50-75 sq ft per gallon per coat. Advanced waterproofing technology, reduces heat-build up, professional grade. Product forms a thick, rubberized shield that expands and contracts to prevent cracking and roof damage. Provides a highly protective barrier which reflects the sun's UV rays. Covers approximately 50-75 sq. ft. per gallon per coat. Meets Energy Star performance ratings. A premium, highly flexible, white acrylic latex roof coating. Reduces heat build-up, thick high-hide formula, expands and contracts. Resists cracking and peeling, provides a protective barrier which reflects the sun's heat and destructive UV rays. Coverage area 50-75 sq. ft. per gallon per coat. Meets Energy Star performance ratings.
Enviro-White 687 Elastomeric Roof Coating Enviro-White 687 Elastomeric Roof Coating Dura-Brite 587 Elastomeric Roof Coating
High solids white coating formulated with acrylic polymers, resins, fillers and titanium dioxide pigments. Dirt pick-up resistant technology prevents dirt and dust buildup. When cured, the coating forms a permeable membrane, which prevents liquid infiltration, but allows moisture vapor to vent, or breathe out of underlying substrate. Covers approximately 2-3 gallons per 100 sq. ft. depending on porosity and roughness of surface. High solids white coating formulated with acrylic polymers, resins, fillers and titanium dioxide pigments. Dirt pick-up resistant technology prevents dirt and dust buildup. When cured, the coating forms a permeable membrane, which prevents liquid infiltration, but allows moisture vapor to vent, or breathe out of underlying substrate. Covers approximately 2-3 gallons per 100 sq. ft. depending on porosity and roughness of surface. Ponding water resistant, no primer needed, energy efficient releases 91 percent of the sun's heat. Expands and contracts without cracking.
Henry HE545623 Aquatac Primer Ames BMX5RG Blue Max Basement And Foundation Coating Ames SEB5 Super Elasto-Barrier Elastomeric Roof Coating
Polymer emulsion based primer for self-adhered membranes such as "Blueskin WP 200" when applied to masonry, concrete, non-treated wood, drywall and metal. Quick drying. Highly tack film provides positive adhesion to membrane. Non-flammable during application. No solvent odors. Designed to provide a high level of tack on vertical surfaces. Apply by spray, roller or brush. Low VOC content. Covers up to 500 sq ft per gallon depending on porosity and texture of surface. 25-degrees to 104-degrees F application temperature.
Ames MSS5 Maximum Stretch Elastomeric Roof Coating
   
 
1