|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to achieve durable, straight and crisps, clean 90-degree outside finished drywall corners. Hot-dipped galvanized coating offers superior corrosion protection. Strong metal reinforcement for drywall corners. Exposed nose of the bead resists impact and forms a screed for finishing. For humid, moisture-prone conditions and high-traffic areas subject to more than normal abuse. Nail, staple or clinch into place. Size 1-1/4" x 1-1/4".
|
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
|
Provides durable, straight and crisp, clean 90-degree outside finished drywall corners. Electrogalvanized coating. Strong metal reinforcement for drywall corners. Galvanized for corrosion protection. Exposed nose of the bead resists impact and forms a screed for finishing. Nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and perforated. Size: 1-1/4 x 1-1/4.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
|
Conceals and reinforces wallboard joints. Buffed on both sides. Center creasing process allows folding for use at corners. Designed for use with ready mix or setting-type joint compounds and gypsum veneer plaster systems. High strength to resist distortion.
|
Transforms 3/4" radius bullnose corners into 90-degree corners for quick, easy baseboard or crown molding installation. Fastens in place with nails or staples, smooth to wall with joint compound. Saves time and effort. Use with metal, plastic, or paper bead.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Open mesh will not trap air that causes blisters and bubbles. Adhesive system requires no pre-plastering for easy DIYer and professional application, and for long shelf life.
|
Repairs damaged walls and ceilings. Works in high traffic areas. Holds galvanized metal drywall patch during repair. Provides thermal barrier.
|
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For drywall, plaster and other flat surfaces. Designed to repair improperly cut openings for electrical outlets. Simply lay the patch over the outlet and cut out area which covers the outlet box. Extra strong Quadra-Mesh fiberglass.
|
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
|
Repairs damaged walls and ceilings. Works in high traffic areas. Holds galvanized metal drywall patch during repair. Provides thermal barrier.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For holes up to 5 inches wide. Can easily be cut with household scissors for several smaller applications. Laminated construction provides multi-directional reinforcement. Two square patches included.
|
No-rust aluminum plate provides rigid backing. Self-adhesive patches. Fiberglass mesh eliminates the need to pre-plaster.
|
Can be used on butt-end joints. Eliminates blisters and bubbles. Fiberglass mesh resists mold and mildew. 33-percent thinner for flatter finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strong fiberglass mesh for toughness. Rigid perforated metal allows extra penetration and adhesion of compound. Rust-free aluminum. Designed for drywall, plaster and other flat surfaces, trouble free results. Easy to apply. Adhesive covers entire back surface for a sure, light bond to area around hole. Contains 1 patch.
|
Open mesh will not trap air that causes blisters and bubbles. Adhesive system requires no pre-plastering for easy DIYer and professional application, and for long shelf life.
|
Strong fiberglass mesh for toughness. Rigid perforated metal allows extra penetration and adhesion of compound. Rust-free aluminum. Designed for drywall, plaster and other flat surfaces, trouble free results. Easy to apply. Adhesive covers entire back surface for a sure, light bond to area around hole. Contains 1 patch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Repairs damaged walls and ceilings. Works in high traffic areas. Holds galvanized metal drywall patch during repair. Provides thermal barrier.
|
Use to patch walls, ceilings and hollow core doors. Fiberglass mesh eliminates the need for pre-plastering. Perforated aluminum plate covers without additional backing. Works with drywall, plaster, wood and most other materials. Will not rust or bleed through.
|
Repairs wall holes and cracks. Repositionable. No-rust mesh aluminum backing provides a sturdy surface while allowing more air circulation for quicker drying time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
|
Long-lasting, alkali-resistant mesh will withstand corrosive effects of the alkaline present in cement board joint finishing, lightweight concrete panel seaming and crack repair, block foundation, and reinforcement for fiber cement, and concrete stucco. Heavier fiberglass yarns for more strength than regular mesh tapes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strong fiberglass mesh for toughness. Rigid perforated metal allows extra penetration and adhesion of compound. Rust-free aluminum. Designed for drywall, plaster and other flat surfaces, trouble free results. Easy to apply. Adhesive covers entire back surface for a sure, light bond to area around hole. Contains 1 patch.
|
Made with a cross-fiberglass construction. Resists shrinking, tearing, stretching and distortion. Also resists joint cracking. In reinforcing joints and corners in drywall interiors, setting-type joint compounds (not ready-mixed or powder drying-type joint compounds) are recommended for use in the first coat over SHEETROCK Fiberglass Drywall Tape. Use to repair small cracks and holes in drywall and plaster surfaces. Coverage approximately 370' to 1,000' gypsum panels.
|
Patch, reinforce, remodel, and repair drywall, plaster, stucco, painted wood, ceilings, walls, etc. Cover holes, cracks or imperfections on flat or curved surfaces, textured and uneven areas. Strong adhesion prevents delamination and shifting. Ready to paint the same day. Self-merchandising counter display shelf pack. Not recommended for holes larger than 7" x 7" without sheetrock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Long-lasting, alkali-resistant mesh will withstand corrosive effects of the alkaline present in cement board joint finishing, lightweight concrete panel seaming and crack repair, block foundation, and reinforcement for fiber cement, and concrete stucco. Heavier fiberglass yarns for more strength than regular mesh tapes.
|
Use to patch walls, ceilings and hollow core doors. Fiberglass mesh eliminates the need for pre-plastering. Perforated aluminum plate covers without additional backing. Works with drywall, plaster, wood and most other materials. Will not rust or bleed through.
|
Open mesh will not trap air that causes blisters and bubbles. Adhesive system requires no pre-plastering for easy DIYer and professional application, and for long shelf life.
|
|
|
