|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides a protective waterproof base beneath the first course of shingles. Zip strip seals down shingle tabs to protect from wind up-lift. Also use for roof flashing and gutter repairs. 50 mil (1.3 mm) thickness.
|
Saturated utility felt is a uniform, flexible felt of organic fibers, impregnated with an asphalt saturant. Used as an underlay beneath asphalt shingles, wood shakes, tiles and other sloped coverings. Meets ASTM 4869 Type I standard. 30RF has twice the thickness of 15RF. Approximately 36 LB per roll.
|
Waterproofing underlayment. Composed of a high tack rubberized asphalt, coated on a non-woven glass fiber mat. Lower surface has a split-release silicone release backing for ease of application. Specifically designed to provide secondary waterproofing protection to shingles as well as prevent ice damage and wind driven rain. Meets ASTM D1970-08 standard and is ICC listed. Self-sealing when penetrated by mechanical fasteners or roofing nails. Fully adhered system prevents lateral moisture migration. Sand surfaced for slip-resistance. UL Classified. Class A fire classification under fiber-glass shingles and Class C under organic felt shingles (per ASTM E108/UL 790). 1.3 mm thickness.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EPA approved; installs easily near the roof ridge; for composition shingle, shake or tile roofs (bend strips to conform to the shape of the tile); for long-lasting protection.
|
Waterproofing underlayment. Composed of a high tack rubberized asphalt, coated on a non-woven glass fiber mat. Lower surface has a split-release silicone release backing for ease of application. Specifically designed to provide secondary waterproofing protection to shingles as well as prevent ice damage and wind driven rain. Meets ASTM D1970-08 standard and is ICC listed. Self-sealing when penetrated by mechanical fasteners or roofing nails. Fully adhered system prevents lateral moisture migration. Sand surfaced for slip-resistance. UL Classified. Class A fire classification under fiber-glass shingles and Class C under organic felt shingles (per ASTM E108/UL 790). 1.3 mm thickness.
|
For installation under new shingles to prevent leaks from ice build-up and wind-driven rain. Also for use under shakes or metal roofing. Asphalt composition fortified with rubber (SBS). Flexible and elastic at low temperatures. Top surface coated with sand to provide a safe, non-slip working area. Split-back release film, self-adhering, easy to apply, easy to cut to size. Self-sealing around nails. Will not rot or decompose. Meets ASTM D1970; U.L. Class A and C fire rating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A replacement for #15 or #30 oil saturated felt; designed for steep slope roofing under asphalt shingles, synthetic shingles, residential metal roofing and cedar shakes; 12 times stronger than #30 felt; meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV; 8 square more per roll compared to #30 felt; easier to install - wider, lighter and more coverage per lap; synthetic construction is impervious to mold; lays flat and does not absorb water and wrinkle; enhanced UV protection; no oil leaching, no hazardous material content; fiber grip slip-resistant walking surface; advanced backside non-slip coating; low temperature flexibility. Roll size: 10 sq. or 93m?.
|
This HIGH TEMPERATURE rated underlayment is for use under all roofing materials including metal and clay tiles. It is composed of a cool white, non-slip polymer film laminated to a rubberized asphalt adhesive. It aggressively bonds to the substrate to limit damage caused by water penetration and leaks, while protecting against ice dams. This self-adhering, self-sealing underlayment can be used as a whole roof underlayment, in valleys, ridges, around chimneys and at eaves. Covers 200 sq. ft roll.
|
A SBS modified bitumen high temperature roofing underlayment reinforced with a textured skid-resistant polyethylene film; specifically designed to be self-adhered on sloped roof surfaces as secondary seal under shingles or tile; self-seals when penetrated by mechanical fasteners or roofing nails; prevents lateral moisture migration; provides premium anti-resistant textured blue film surface for applicator safety; provides split release backing for fast application; meets ASTM D1970 standard and is ICC listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smooth, film surface link barrier with special adhesive for one-time repositioning, but aggressively adheres over time. Unique film surface pattern improves footing even in hot weather. Self seals around nails or metal roofing fasteners. Split back release film peels off in layers for faster installation and greater homeowner value. Fiberglass reinforcement helps resist wrinkling and buckling. Lays flatter under shingles. Design to withstand high metal roof temperatures and will not melt or flow. High temperature compound is suitable for most metal roof applications. For application under copper and zinc. Passes low temperature flexibility (-20 degrees) and waterproof integrity after low temperature flexibility requirements. Can be exposed for up to 60 days if necessary.
|
Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap.
|
Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap.
|
Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap.
|
Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used where waterproofing is needed. Weatherproof. For roofing, patching, gutter repair, flashing, and general waterproofing where the membrane will be exposed. A laminate of reflective aluminum foil, rugged, cross-linked polymer films, and a thick layer of rubberized asphalt. Designed for low-slope roof applications. For mobile homes, trailers, RVs, and sunrooms. The asphalt compound adheres to most surfaces and seals around most punctures, forming a protective waterproof barrier. Aluminum surface reflects heat. Puncture and abrasion resistant. Stretches to allow for building movement. Conforms to odd shapes. Requires no coating or covering for exposure to sunlight. Tested to ASTM D 1970, meets the requirements of ICC-ES AC-75, and has a Class A Fire rating when installed on a non-combustible deck. Coverage sq. ft. may vary depending on amount of over lap.
|
#30 felt replacement used for steep slope roofing designed for use under all primary roofing types including; Asphalt Shingles, Synthetic Shingles, Metal roofing, and Cedar Shakes.; 11 times lighter and 14 times stronger than #30 felt; Class A Fire ASTM E108, meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV; Class 4 hail rating; ICC ES Approved: synthetic construction inert to mold growth; Patented ?Sure-Foot? slip resistant nodular walking surface, contributes to ?LEED? points, certified minimum of 20% reclaimed content (100% recyclable); all temperature performance -40? F to 240? F; 6 month UV exposure; cool light gray surface doesn?t expand or contract; dual logo custom printing available; Roll size: 10 sq. or 93m?.
|
A premium Ice Damming and Leak protection used for steep slope roofing under all metal, tile, slate, shake and shingle roofing; the only modified rubberized asphalt Peel & Stick underlayment with a patented slip resistant "Sure-Foot" nodular walking surface technology that allows for easier steep slope walkability, even in wet or dusty conditions. PSU30 also features a crinkled silicon treated poly split release liner making removal quicker and easier than single sheet competitors. Features a self sealing lap seal system which forms an impervious asphalt to asphalt bond at overlapping seams, delivering superior waterproofing protection; an approved Polyfoam underlayment for use with ?Polyset? foam systems; Class A Fire ASTM E108; Meets and exceeds ASTM D1970; high temperature (240?F / 115?C) flow resistance; Installation temperature 40?F (5?C) and above; synthetic construction inert to mold growth; cool light gray surface doesn?t expand or contract; up to 6 months UV exposure; Roll size: Gross 216 sq. ft. or 20m?; Net of overlap 2 sq.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#30 felt replacement used for steep slope roofing designed for use under all primary roofing types including; Asphalt Shingles, Synthetic Shingles, Metal roofing, Tiles, Slate, and Cedar Shakes.; 6 times lighter and 20 times stronger than #30 felt; Class A Fire ASTM E108, meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV; Class 4 hail rating; ICC ES Approved: synthetic construction inert to mold growth; Patented ?Sure-Foot?? slip resistant nodular walking surface, contributes to ?LEED? points, certified minimum of 20% reclaimed content (100% recyclable); all temperature performance -40? F to 240? F ; 6 month UV exposure; cool light gray surface doesn?t expand or contract; dual logo custom printing available; Roll size: 10 sq. or 93m?.
|
Saturated utility felt is a uniform, flexible felt of organic fibers, impregnated with an asphalt saturant. Used as an underlay beneath asphalt shingles, wood shakes, tiles and other sloped coverings. Meets ASTM 4869 Type I standard. 30RF has twice the thickness of 15RF. Approximately 36 LB per roll.
|
Constructed from fiberglass mat, impregnated and coated with hot asphaltic saturant, then coated on the weather side with mineral granules in a 36" wide path. This forms a 36" wide mineral surfaced roll. For use with low-sloped roofs. 90# can be used as an underlayment and a final cap sheet. 108 square foot coverage. 50 mil. thickness.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A general purpose economical choice roll roofing product that can be used with cold adhesives or hot mopping applications for low slope roofs; manufactured from fiberglass mat and it's coated on both sides of the fiberglass mat with weathering grade asphalt and is covered on the top with ceramic mineral slate surface granules.
|
Constructed from fiberglass mat, impregnated and coated with hot asphaltic saturant, then coated on the weather side with mineral granules in a 36" wide path. This forms a 36" wide mineral surfaced roll. For use with low-sloped roofs. 90# can be used as an underlayment and a final cap sheet. 108 square foot coverage. 50 mil. thickness.
|
Constructed from fiberglass mat, impregnated and coated with hot asphaltic saturant, then coated on the weather side with mineral granules in a 36" wide path. This forms a 36" wide mineral surfaced roll. For use with low-sloped roofs. 90# can be used as an underlayment and a final cap sheet. 108 square foot coverage. 50 mil. thickness.
|
|
|
