|
|
|
|
|
|
|
|
|
|
|
For reinforcing flat surface joint, seams and cracks. Can be used in construction or repairing box, chest, and furniture.
|
Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws.
|
Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
For reinforcing flat surface joint, seams and cracks. Can be used in construction or repairing box, chest, and furniture.
|
For reinforcing flat surface joint, seams and cracks. Can be used in construction or repairing box, chest, and furniture.
|
Used to reinforce flat surface joints, seams and cracks. For box, chest and furniture construction or repair. Screws not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
For reinforcing flat surface joint, seams and cracks. Can be used in construction or repairing box, chest, and furniture.
|
Use 3/8" bolts and/or 16d nails. Used to support the joining of a cross beam with a support beam by application to the side. FoUr superior strength plates should be used on both sides of the joint with through bolts.
|
For reinforcing flat surface joint, seams and cracks. Can be used in construction or repairing box, chest, and furniture.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to move refrigerators and freezers. Plastic wheel. Zinc plated finish. 7/8" x 2".
|
For reinforcing flat surface joint, seams and cracks. Can be used in construction or repairing box, chest, and furniture.
|
Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts.
|
|
|
|
|
|
|
|
|
|
|
Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts.
|
Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws.
|
|