|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed.
|
Designed to engage the bottom of a single TAB-LOC door in either the open or closed position to hold firm against the building. For bi-parting doors stop engages in the open position only, also used on wood frame doors using #6061 or #6062 continuous bottom guides. Slotted holes in each leg allow both lateral and vertical adjustments. Bolt, nut, and washer are included for easy attachment. Boxed.
|
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4" thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extra-wide guides are designed for corrugated metal-clad doors, can be used as a door stop when mounted sideways. Curved section of guide may be turned sideways allowing straight access when installing screws. Fasteners are not included. Guides have holes for spikes as well as larger holes for 3/8" lag screw mounting. Guide is adjustable for doors up to 5-1/2" thick.
|
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose.
|
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to attach #6004 guide rail. Slotted hole in each leg allows for both lateral and vertical adjustments. Bolts, nuts and washers are included for easy attachment.
|
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose.
|
Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6" x 6" post. 1/2" rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed.
|
Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed.
|
Without screws. Each loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed.
|
Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed.
|
Adjustable 2-1/2" to 3-1/8". Pack Loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
|
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
|
Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
|
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
|
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
|
For 1-1/2" Steel / Wood Lateral Doors. Ln Loose.
|
Designed for use on 1-1/2" thick wood frame sliding doors. When nailed to the bottom of a wood frame door, these guides engage with #6004 guide rail to prevent wind damage to both the door and building. Pre-punched mounting brackets are attached. Pack loose.
|
|
|
